Connecting Rod 61500030009 For WEICHAI Engine WP10

Description

Introduction to WERICHAI ENGINE WP10 Connecting Rod 61500030009:

The WEICHAI Engine WP10 engine parts 61500030009 Connecting Rod is an important component of heavy truck engine system. It is located inside the engine cylinder liner and connects the engine piston, responsible for converting the reciprocating motion of the engine piston into the rotational motion of the crankshaft, transmitting the force of the piston to the crankshaft, and thereby outputting power.

The structure and functions of the heavy truck engine connecting rod 61500030009:

The connecting rod assembly mainly consists of the connecting rod body, the connecting rod cover, and the connecting rod bolts.

1. Connecting rod body: As a key component linking the crankshaft and the piston, the connecting rod body bears the function of power transmission. It is forged from alloy steel, with hardness reaching HRC32-36 and tensile strength exceeding 980 MPa.
2. Connecting rod cover: The connecting rod cover ensures sealing performance and structural integrity, effectively preventing oil leakage.
3. Connecting rod bolts: They fix and connect the connecting rod body and the connecting rod cover, ensuring a tight and normal connection between the two parts.

The material of the WEICHAI engine WP10 engine connecting rod 61500030009:

The engine connecting rod main materials are classified as ductile iron, alloy steel, and aluminum alloy, etc. Their advantages are as follows:

• Ductile iron: This material is the most commonly used, with low cost and high strength and durability. It can withstand large impacts and is widely applied in heavy truck models.
• Aluminum alloy: This material is lighter in weight, has high heat conductivity, and can improve fuel filter performance, but its strength is relatively low and is suitable for special environments.
• Alloy steel: Compared with ductile iron, this material has significantly improved strength, hardness, and wear resistance, but the cost is higher.

Common problems of the connecting rod 61500030009 for trucks:

1. Decreased power output. Due to the damage of the connecting rod, the power transmission is reduced, affecting the performance of the engine.
2. Abnormal noise and vibration. After the connecting rod is damaged, abnormal noise and vibration occur during the reciprocating motion of the engine.
3. Increased fuel consumption. The damage of the connecting rod leads to the decline of the engine’s power performance, requiring more fuel to improve the performance.
4. Unable to start. After the connecting rod is damaged, it may cause the engine to fail to start, and the vehicle cannot run normally.

The consequences caused by the damage of the connecting rod are very serious. Besides the above points, it may also cause problems such as decreased oil pressure, engine overheating, and engine stalling.

How to Maintenance for the connecting rod 61500030009?

Regularly check the operation condition of the engine parts. If any abnormality occurs, such as abnormal noise, vibration, or power loss, it is recommended to promptly check whether it is due to the damage of the engine connecting rod. If there is damage, replace it with a brand-new high-quality engine connecting rod assembly in time.

ZK truck parts offer professional technical guidance for installation services. We can provide free 7×24-hour service. If you have any questions about the clutch pressure plate, please do not hesitate to contact us. We can provide the best service for all our customers. if you have more request about heavy truck spare parts or Engine part connecting rod, please don’t hesitate to contact us.