SINOTRUK rear light WG9719810011 of HOWO spare parts

Description

SINOTRUK HOWO heavy truck rear light WG9719810011 introduction:

The rear light WG9719810011 plays a crucial role in the safety configuration system of HOWO spare parts. Tail light is installed at the rear of the heavy truck, it is not only a key component of the truck’s lighting system but also an important link in ensuring daily driving safety.

What functions does the rear light WG9719810011 have?

The core function of the HOWO heavy truck rear tail light is to emit light signals, which can remind the trucks behind and also has a certain lighting function. It integrates a variety of practical functions:

1. Brake light: When the driver steps on the brake pedal, the brake light turns on rapidly, emitting a conspicuous red light to convey the signal of deceleration or stopping to the trucks behind, effectively avoiding rear-end collisions. Its brightness and response speed are crucial for the timely braking of the vehicles behind.
2. Turn signal: When the vehicle turns or changes lanes, the turn signal flashes, clearly informing the vehicles behind the vehicle’s driving intention, allowing other road users to make corresponding reactions in advance, ensuring driving safety.
3. Marker light: The marker light is turned on in night or low visibility conditions, outlining the vehicle’s shape, allowing vehicles behind to accurately judge the width and length of the vehicle, enhancing visibility and reducing collision risks.
4. Rear fog light: In severe weather conditions such as heavy fog and rainstorms, the strong light of the rear fog light can penetrate the thick fog, providing clear warnings to the vehicles behind, preventing rear-end accidents due to poor visibility.
5. Reverse light: When theheavytruck is reversing, the reverse light turns on, illuminating the rear area of the vehicle, and sending a reverse signal to the vehicles behind and pedestrians, reminding them to pay attention and avoid, reducing safety hazards during reversing.

Common faults of the rear light WG9719810011:

1. Rear light WG9719810011bulb failure: This is one of the most common faults. Due to the long mileage and high usage frequency of heavy-duty trucks, the tail light bulb will gradually age during the long-term lighting and dimming process. Over time, the filament may break or the resistance may increase, resulting in reduced tail light brightness or even complete failure. In addition, factors such as voltage fluctuations and frequent on-off operations may also accelerate the bulb’s failure.
2. Rear light WG9719810011Lamp cover cracking and damage: The lamp cover of the rear taillight is usually made of plastic material. Although it has certain impact resistance and weather resistance, it may still be damaged under various factors in actual use. For example, during vehicle driving, if it encounters a collision, it may directly cause the lamp cover to crack; long-term exposure to harsh environments, such as intense ultraviolet radiation and extreme temperature changes, will cause the plastic lamp cover to gradually age, become fragile and brittle, and reduce transparency, thereby affecting the light transmission effect. In addition, impacts from stones or other hard objects may also cause scratches or damages to the surface of the lamp cover.

The rear light WG9719810011 plays an important role in daily driving safety. During normal use, it is necessary to pay attention to timely maintenance. If the bulb is damaged or the lamp cover is damaged, it needs to be replaced in time.

Daily maintenance of the rear light WG9719810011:

1. Regular Inspection: Drivers should develop the habit of conducting regular inspections of their rear taillights. Before each trip and after returning from a trip, they should perform a simple visual inspection of the taillights to check if the bulbs are properly lit and if the lamp covers are damaged or cracked.
2. Prompt Replacement: Once a bulb is found to be damaged or the lamp cover is cracked, it should be replaced promptly. When replacing the bulb, choose a lamp of the same model to ensure that the brightness and color of the light meet the requirements. When replacing the lamp cover, pay attention to choosing a reliable product to ensure a firm installation.
3. Cleaning and Maintenance: Regularly clean the rear taillights to remove dust, dirt, and insect corpses on the surface of the lamp covers to maintain good light transmission. Use a soft cloth and mild cleaner for cleaning, but avoid using overly sharp or rough tools to prevent scratching the lamp covers.

The truck tail light of HOWO trucks spare parts WG9719810011, is just a small component on the truck parts, but it plays an indispensable role in ensuring driving safety. By understanding their functions, common faults, and maintenance and replacement methods, drivers can better maintain and manage the rear taillights, ensuring they are always in good working condition and providing a strong guarantee for safe driving.