Engine parts connecting rod bearing VG61560030033 for WD615

Description

Structure of the engine parts connecting rod bearing VG61560030033 for SINOTRUCK truck and WEICHAI WD615 engine system:

The engine parts connecting rod bearing VG61560030033 is an important component in the engine system. It is installed at the connection point between the connecting rod and the crankshaft and plays a significant role in the engine system. The engine connecting rod bearing has a special design to ensure the normal operation of the engine and prevent cylinder wear.

The connecting rod bearing is mainly divided into upper and lower bearings. The rod bearing wall has an oil hole, which enables the engine system to supply oil to the piston at the appropriate time and period during operation, allowing the piston to work normally and preventing wear. The lower rod bearing mainly withstands the load brought by movement and has the characteristic of high wear resistance. Through the precise combination of the upper and lower rod bearings, it ensures the smooth relative movement of the connecting rod and the crankshaft, maintaining the normal operation of the engine.

Function of Engine system Connecting Rod Bearing VG61560030033:

• Wear-resistant support: Reduces friction between moving parts, protecting the crankshaft and connecting rod.
• Force transmission: Transmits the reciprocating motion power of the piston to the crankshaft to achieve power output.
• Lubrication assistance: Cooperates with the oil circuit design to ensure the normal operation of the engine lubrication system.

The material of the engine parts connecting rod bearing VG61560030033:

The connecting rod bearing is usually composed of steel plates (high-strength low-carbon steel) and wear-resistant alloys (Babbitt alloy or copper-based alloy). This material ensures good structural support, low friction coefficient and corrosion resistance. At the same time, the installation position of the connecting rod bearing is reasonable, avoiding the load-bearing area, reducing wear and increasing service life.

Installation and maintenance of the heavy truck connecting rod bearing VG61560030033:

1. During installation, pay attention to the direction. The upper bearing ring and the lower bearing ring cannot be interchanged. The oil groove direction must face the oil pump to ensure the normal supply of lubricating oil.
2. The screws need to reach the corresponding torque. Keep the surface clean and tidy. Tighten them to prevent the bearing ring from loosening and increasing wear.
3. Regular inspection is recommended. It is suggested to check for wear, cracks or alloy detachment every 50,000 to 80,000 kilometers. If damage is found, replace it in time.

Common problems of the engine parts WD615 connecting rod bearing VG61560030033:

1. Abnormal wear. Long-term high-load operation or insufficient lubricating oil can easily lead to abnormal wear. It is necessary to replace it in time to ensure the smooth operation of the engine.
2. Insufficient lubrication, resulting in severe wear of the connecting rod bearing, overheating and burning or melting. Check whether it is caused by oil pump failure or oil circuit blockage, etc.
3. Quality problem of the connecting rod bearing. Inferior products may have air holes or cracks during production, and uneven force can easily lead to rupture. Please replace it with products produced by regular manufacturers in time.
4. Using inferior lubricating oil. Inferior lubricating oil will also aggravate the wear of the connecting rod bearing, causing overheating and damage.

More types Engine system conrod bearing can provide by ZK TRUCK SPARE PARTS company :