SHACMAN HANDE Axle HD485 differential DZ95129320008

Description

Introduction to HANDE Axle HD485 differential DZ95129320008：

The heavy truck SHACMAN HANDE Axle HD485 differential DZ95129320008 is located in the transmission system of heavy trucks and is an important component of the gearbox system. Its main function is to allow the left and right driving wheels to rotate at different speeds during vehicle driving, thereby achieving the differentiation of the rotational speeds of the two sides of the wheels, and improving the stability and smoothness of the vehicle body during cornering.

The structural composition of SHACMAN HANDE Axle HD485 differential DZ95129320008:

1. Side gears, linked to the wheels through half shafts, are responsible for transmitting power to the wheels.
2. Planetary gears, connected to the ring gear and the planetary frame, are used to receive and distribute power.
3. Ring gears, connected to the input shaft, are responsible for receiving power from the engine.
4. Planetary gear shafts, supporting the rotational motion of the planetary gears.
5. Half shaft gears, cooperating with the planetary gears, meet the different rotational speeds of the wheels during vehicle cornering.

The materials of HANDE Axle HD485 differential DZ95129320008:

The main materials of heavy truck differential assembly are usually cast iron and aluminum alloy. Among them, the cast iron material is mainly nodular cast iron, which is widely used due to its high strength, high toughness, advanced production technology and high cost performance; while the aluminum alloy material has similar strength performance to cast iron, but better toughness, and is more outstanding in terms of weight and heat conduction performance.

How to choose the material? If one is aiming for high strength, high toughness and economic efficiency, it is recommended to select cast iron material. It has a high cost-performance ratio and can meet the needs of most application scenarios. If there is a high demand for heat dissipation performance, then aluminum alloy material can be chosen. While ensuring strength and toughness, it can also offer good thermal conductivity and lightweight design.

Common Faults and Solutions of HANDE Axle Differential DZ95129320008:

The common faults of the differential assembly are usually caused by noises, oil leakage, unstable driving, insufficient lubrication, and damaged parts. if have any question, howo to solutions to the faults:
1. Regularly check the lubrication status of the differential assembly to avoid accelerated wear due to insufficient lubrication.
2. Check if the gear clearance is too large to prevent noise and wear problems caused by poor meshing.
3. Replace damaged parts in time to eliminate noises and other potential hazards.
4. Assembly issues, improper installation, being too tight or too loose can all lead to abnormal operation and damage of the differential assembly.

If the differential assembly has a fault, it must be checked and repaired in time. If the situation is serious, it is recommended to replace the differential assembly.

ZKtruck is a professional manufacturer of chassis components and axle truck parts. The factory has 20 years of technical experience. It has an ample supply of different types of differentials to meet the demands of various vehicle models. The products have been strictly tested in the market and comply with national standards. They are provided as supporting services for many well-known heavy truck enterprises such as Sinotruk, SHACMAN truck,  HOWO truck, HOHAN truck, FAW truck, and Dongfeng truck, ect. if you have more questions about HANDE Axle Differential DZ95129320008, please don’t hesitate to contact us. We will provide 7×24  hours service.