SINOTRUCK cab parts shock absorber WG1664440068

Description

SINOTRUCK series HOWO truck, SHACMAN series DELONG truck, Cab parts Shock Absorber WG1664440068:

Introduction to the cab parts shock absorber WG1664440068 shock airbag:

Cab parts shock absorber is one of the most important components of the suspension system of heavy trucks. The main function of the shock absorber WG1664440068 is to control the vibration of the spring, maintain the effect of the spring, reduce the bumps and impacts caused by uneven road surfaces, and improve the safety and comfort of driving.

Working principle of the cab parts shock absorber WG1664440068:

When driving over uneven road surfaces, the piston of the shock absorber moves up and down. Under the action of the piston valve and the compression valve, the internal oil flows back and forth repeatedly, thereby generating damping force. This force can effectively absorb and dissipate the vibration energy brought by the unevenness of the road surface, maintaining the stability of the vehicle body and the comfort of driving.

The classification structure of the HOWO truck shock absorber:

• Shock absorbers are generally classified into single-port type and double-tube type.
  The single-tube type has only one cylinder tube, with high-pressure nitrogen and oil inside, separated by a piston. The advantage is that gas and oil are separated, and heat dissipation is good, but the cost is relatively high.
• The double-tube type is composed of an inner tube and an outer tube. The inner tube is equipped with a valve system, and the outer tube contains nitrogen. This type of shock absorber can provide different damping forces on different road surfaces and can adapt to various road conditions.

Faults and maintenance of SHACMAN truck shock absorber WG1664440068:

1. The common faults of heavy truck shock absorbers are usually leakage of oil, damage to the seal, abnormal noise, strong bouncing sensation and failure of shock absorption.
2. When the above reasons occur in the shock absorber, it is necessary to first check the shock absorber, observing its appearance and performance. If the appearance is in a damaged state, the shock absorber will fail. In such cases, it is recommended to replace the shock absorber promptly.
3. For the problem of oil leakage, if oil leakage is detected, it is recommended to replace the shock absorber with a new one in time.
4. For abnormal noise and failure of the shock absorber, it is recommended to go to a repair shop and remove the shock absorber for inspection to determine the cause. If the shock absorber is aging and has been used for a long time without proper maintenance, it is recommended to replace it with a brand new one promptly.
5. During installation and operation of the shock absorber, it is necessary to ensure proper operation to avoid damage to the shock absorber due to operational errors.

The replacement cycle of the SINOTRUCK truck shock absorber WG1664440068;

The service life of a general heavy truck shock absorber is affected by mileage, driving habits and driving environment. Under normal driving conditions, it is generally recommended to replace it every 3 years or 100,000 kilometers. However, in harsh environments, it is recommended to shorten the replacement time or mileage. In addition, having good driving habits can also extend the service life of the shock absorber. Avoiding aggressive acceleration, sudden braking and high-speed cornering habits can prolong the service life of the cab shock absorber.

ZK truck parts offer professional technical guidance for installation services. We can provide free 7×24-hour service. If you have any questions about the clutch pressure plate, please do not hesitate to contact us. We can provide the best service for all our customers.