HOWO TH7 lifting cylinder WG9925823014

Description

HOWO TH7 lifting cylinder WG9925823014 introduce：

When it comes to HOWO TH7 lifting cylinder WG9925823014, people usually think of dump trucks or dump wagons. Yes, the lifting cylinder is the core hydraulic component used for lifting the cargo compartment. So, what is a lifting cylinder WG9925823014? Let’s introduce its classification, advantages and disadvantages, as well as fault issues in detail below.

What is a HOWO TH7 lifting cylinder WG9925823014?

HOWO TH7 lifting cylinder WG9925823014, also known as a hydraulic cylinder, is the power execution component of the hydraulic lifting system in a dump truck. Its function is to convert the pressure provided by the hydraulic system into a huge thrust, lifting the entire heavy cargo compartment and completing the unloading process. The greatest advantage is that it can achieve different inclination angles according to the driver’s control, thus completing different degrees of unloading. During the lifting and supporting process, the lifting cylinder needs to bear the huge loads from the goods themselves and the cargo compartment. Therefore, it is essential to strictly select genuine quality products.

Classification and characteristics of lifting cylinders:

1. Low-floor lifting cylinder

• The low-floor lifting cylinder is essentially an active control component of the air suspension system. It is installed between the axle and the frame, and is usually part of the air suspension system. It is used to adjust the height of the vehicle body and maintain the balance of the entire vehicle.
• Working principle: By inflating or deflating compressed air into the airbag (air spring), the height of the airbag can be changed, thereby raising or lowering the position of the vehicle frame relative to the axle.
• When the vehicle needs to pick up or drop off passengers or load/unload goods at the station, the system will release some of the air from the airbag, causing the height of the entire side or specific part of the vehicle body to decrease. This creates a low-step entrance, greatly facilitating situations such as for the elderly, the disabled, or cargo handling.
• When the vehicle is about to start, the system will inflate the airbag, restoring the vehicle body to its normal driving height to ensure sufficient ground clearance and driving stability.

2. High-floor lifting cylinder

• When the high-floor lifting cylinder is operating with no load or light load, it can lift the entire axle, causing it to rise off the ground. This reduces the friction of the tires and lowers fuel consumption.
• Working principle: It is an independent lifting cylinder or air bladder. When necessary (usually when the vehicle is empty or lightly loaded), the driver activates the lifting cylinder through the switch in the driver’s cab, raising the axle along with the wheels, causing it to leave the ground and fixing it in the lifted position through a mechanical locking device.
• Core function: “Fuel efficiency and reduced wear”
• Reducing resistance: After lifting a single axle, the number of vehicle tires decreases, thereby reducing rolling resistance and friction.
• Saving fuel: With reduced resistance, fuel consumption naturally decreases.
• Reducing tire wear: The lifted axle tires do not contact the ground, avoiding unnecessary wear.
• Improving maneuverability: For tractor-trailers, lifting a trailing steering axle can reduce the turning radius.
• You can understand it this way: It’s like installing a “retractable” wheel on the vehicle, raising it when not needed to reduce the burden.
• Application scenario: HOWO TH7 lifting cylinder WG9925823014 is very common in multi-axle trucks with a large total weight. For example, an 8×4 dump truck can lift the front steering axle to reduce the turning radius when returning empty, or lift a drive axle to save fuel. A 6×2 tractor can lift its load-sensing axle.

How to maintain and service the HOWO TH7 lifting cylinder WG9925823014?

1. Regularly check the hydraulic oil: Ensure the oil level is normal and the oil quality is clean. Replace the hydraulic oil and filters according to the specified schedule.
2. Check the sealing performance: Frequently observe if there are any signs of oil leakage from the cylinder.
3. Lubricate the articulation points: Regularly add lubricating grease to the pins and bearings at both ends of the cylinder to prevent abnormal wear.
4. Standard operating procedures:

• Before lifting, ensure the vehicle is parked on a flat and solid surface.
• Do not overload.
• Operate smoothly during lifting and lowering to avoid impacts.
• Drive after the cargo compartment is fully retracted.

5. Regular professional maintenance: When any fault signs appear, promptly send it to a professional repair shop for inspection and repair to avoid small problems turning into major ones.
6. More details about lifting cylinder WG9925823014, please contact us , will online 7x24hours.