SINOTRUCK howo spare parts brake chamber WG9000360600

Description

Introduction to brake chamber WG9000360600 of SINOTRUCK, HOWO truck parts:

The brake chamber WG9000360600 of truck spare parts, also known as brake booster or brake booster pump, is an important component in the braking system of heavy trucks. Its main function is to convert the compressed air pressure into mechanical energy, by slack adjuster to drive the brake camshaft, thereby pushing the friction plates of the brake shoes and the brake drum to rub against each other, generating braking force to achieve the purpose of braking or reducing the truck speed.

The composition of the truck spare parts brake chamber WG9000360600:

The brake chamber is generally composed of an intermediate aluminum block, upper and lower covers, intermediate diaphragm, spring, push rod, housing, fixing screws, clamps, etc. The intermediate aluminum block and the upper and lower covers form a sealed air chamber, and the diaphragm separates the air pressure chamber and the spring chamber; the push rod passes through the guide sleeve to transfer the diaphragm thrust to the adjusting arm; the fixing screws and the clamps ensure the sealed of the system.

This design make the brake chamber to finish charging and discharging response within 1.5 seconds, and the conversion of the capabilities among various modules forms “pressure chamber – transmission chain – sealing body”, thereby achieving the rapid execution of the braking command.

The types of the HOWO truck spare parts brake booster:

Heavy truck brake chamber actually consists of two types: spring brakes chamber and service brake chambers.

The spring brakes double duty function are: apply brakes or release brakes. Parking brake or emergency brake. It usually includes the running chamber and parking chamber. Through inflation and deflation, it generates force for braking and parking.
Service chambers only service one function, apply brakes or release brakes. While the brake chamber uses the force generated by inflation to perform main braking.

Material of the heavy truck brake chamber WG9000360600:

The brake chamber is generally composed of materials such as cast iron and aluminum alloy. The upper and lower covers are mainly made of cast iron, while the aluminum block in the middle is made of aluminum alloy, and the diaphragm is made of nitrile rubber combined with cord fabric.

The advantages of cast iron upper and lower covers are that the material is thick and firm, which improves the durability and wear resistance of the brake chamber, and is suitable for various usage environments.
Aluminum alloy material makes the chamber lightweight, while strengthening the heat dissipation, corrosion resistance and other properties, reducing the weight of the vehicle body, and significantly improving the braking effect.

Common Faults and Maintenance of Brake Chamber WG9000360600:

The most common faults of the brake chamber are generally leakage, cross-leakage and brake failure. Among them, leakage is the most common fault, and problems usually occur due to leakage. The causes of leakage are generally due to assembly problems or quality issues. For example, if the clamp is not installed properly or the diaphragm is of poor quality.

How to maintain the brake chamber? It is recommended to regularly inspect and maintain the brake chamber. Check whether the components are installed tightly, whether the accessories are damaged, and whether the diaphragm is intact. If damaged components are found, it is recommended to replace them in time, but it is more recommended to replace the entire brake booster to ensure driving safety.